Mounting assembly for encoder series 65/67 to size NEMA 42

Part number

 9 0 9 1
 
 
 
 
3D AutoCAD drawing of bracket (zipped)   -   DWG = [R13] [R14] [R2000]       DXF = [R13] [R14] [R2000]
Mounting Instructions
Mount fixture to the encoder with four self-tapping M6 x 10 screws and four No. 6.2 washers.
Slide the encoder onto the shaft.
With two 1/4-20 screws, tighten the encoder fixture to the motor-frame or machine.
Keep clearance between the encoder and motor or housing by bending the fixture arms as required.
Tighten the setscrew onto the shaft.
Connect the encoder as per wiring specifications.  Make sure power supply is within the proper voltage and current rating.
Encoder can be mounted with the setscrew on the machine side or on the opposite side for either CW or CCW.
See datasheet for CW and CCW directions of the outputs.
Technical data

0.3 mm stainless steel sheet
four self-tapping M6 x 10 screws
four No. 6.2 washers
1 800 295 5693

UK   + 44 01978 363888

BR   55 01938 775214